troubleshooting csf

i found new command here:

perl /etc/csf/csftest.pl

http://www.webhostingtalk.com/showthread.php?t=850480

csf ipv6 block all incoming connection

there is solution

TCP6_OUT = "0:65535"
UDP6_OUT = "0:65535"

reference: http://forum.configserver.com/viewtopic.php?t=3662

finally - NAT server works!

i'm using this template

#---------------------------------------------------------------  # Load the NAT module #  # Note: It is best to use the /etc/rc.local example in this  #       chapter. This value will not be retained in the  #       /etc/sysconfig/iptables file. Included only as a reminder.  #---------------------------------------------------------------    modprobe iptable_nat   #---------------------------------------------------------------  # Enable routing by modifying the ip_forward /proc filesystem file #  # Note: It is best to use the /etc/sysctl.conf example in this  #       chapter. This value will not be retained in the #         /etc/sysconfig/iptables file. Included only as a reminder.  #---------------------------------------------------------------    echo 1 > /proc/sys/net/ipv4/ip_forward    #---------------------------------------------------------------  # Allow masquerading # - Interface eth0 is the internet interface  # - Interface eth1 is the private network interface  #---------------------------------------------------------------    iptables -A POSTROUTING -t nat -o eth0 -s 192.168.1.0/24 -d 0/0 \           -j MASQUERADE     #---------------------------------------------------------------  # Prior to masquerading, the packets are routed via the filter  # table's FORWARD chain.  # Allowed outbound: New, established and related connections  # Allowed inbound : Established and related connections  #---------------------------------------------------------------    iptables -A FORWARD -t filter -o eth0 -m state \           --state NEW,ESTABLISHED,RELATED -j ACCEPT     iptables -A FORWARD -t filter -i eth0 -m state \           --state ESTABLISHED,RELATED -j ACCEPT 

thank you for faj-kumar for let me find this

http://www.linuxhomenetworking.com/wiki/index.php/Quick_HOWTO_:_Ch14_:_Linux_Firewalls_Using_iptables

NAT made easy

new webmin module released. this is what i'm looking for

Simple Firewall Creator module released

Thanks to Manny Fernandez for open-sourcing a new module for easily creating firewalls on Linux and FreeBSD systems, using pre-built blocks of rules and services. You can download it from itsecure-firewall.wbm.gz, and install it in Webmin at Webmin Configuration ->Webmin Modules.

Thank you for developer. :)

install csf on cpanel

http://www.mysql-apache-php.com/csf-firewall.htm