sms gateway linux

starting new project:
http://smstools3.kekekasvi.com/index.php?p=hardwarecomp

http://www.frontlinesms.com/technologies/download/
http://linuxblog.darkduck.com/2014/01/sms-gateway-linux.html

1. Create your destination folder

Create a folder named "frontlinesms" in "/opt" directory.

Go to the terminal and type: 

cd /opt
mkdir frontlinesms

You will need to copy the software installer in the new folder. It can be downloaded straight from the website Frontlinesms.com.

2. Run the installer

Type "sudo ./frontlinesms2_unix_2.1.3.sh" in your terminal and let the installer run. Remember you have created a new folder, so choose it when the setup gives you the option to change the folder.

Let the installation proceed and click 'Skip Registration' at the end and the press 'Finish'.

You should now be able to see Frontline on your menu and open its main screen.

3. Install your GSM modem or cellphone

Make sure the Frontline software is not working. Connect your mobile phone and see it the device it's recognized. If not, you should look for the drivers online. It would be best for you to check their website for supported devices.

Once you have connected your mobile phone, type "lsusb" and identify your GSM modem on the list. After you've made sure it's properly installed, you can open the software main screen again and send a trial SMS. The interface is quite friendly and clear so you should have no problem from this point onwards.