1. install wvdial
yum install wvdial
2. scan for usb device
[root@local ~]# wvdialconf /etc/wvdial.conf
Scanning your serial ports for a modem.
WvModem<*1>: Cannot get information for serial port.
ttyS0<*1>: ATQ0 V1 E1 -- failed with 2400 baud, next try: 9600 baud
ttyS0<*1>: ATQ0 V1 E1 -- failed with 9600 baud, next try: 115200 baud
ttyS0<*1>: ATQ0 V1 E1 -- and failed too at 115200, giving up.
ttyS1
Port Scan<*1>: S1
ttyS2
Port Scan<*1>: S2
ttyS3
Port Scan<*1>: S3
Sorry, no modem was detected! Is it in use by another program?
Did you configure it properly with setserial?
Please read the FAQ at http://open.nit.ca/wvdial/
If you still have problems, send mail to wvdial-list@lists.nit.ca.
3. switch from usb mass storage to modem mode
http://www.linuxquestions.org/questions/linux-newbie-8/zte-ac2627-usb-modem-not-working-in-fedora-9-a-795499/
yum install usb_modeswitch
No comments:
Post a Comment